OUR PRODUCTS
Guide rail horizontal FH
| Bauwerke | Building, Other, Tower |
|---|---|
| Befestigungsuntergründe | Concrete, Masonry, Other, Steel |
| Oberfläche des Untergrunds | Other, Plane (flat), Round (tube), Steel grid |
| Fallschutz | Guide rail |
| Material Fallschutz | Stainless steel, Steel hot dipped galvanized |
Anchor device according to EN 795-D
Guide rail incl. Profile connectors and screws.
- Available in steel and stainless steel
- The opening of the C-profile must be mounted in the direction of force (fall direction)
2 variants for your requirements
Note on mounting distance: Max. 1000mm
A factory-made rectangular perforation of the guide rail can be added at a distance of 1000mm.
FH-ST
Steel St-tZn, hot-dip galvanized (1.0037)
- Guide rail: 50x32mm
- Segment length: 3000mm (standard), 2000mm, 1000mm - gradations up to 6000mm
- Weight: 3,1kg/m
- Minimum bending radius of 600mm possible for segments
FH-VA
Stainless steel, pickled (1.4401/1.4571)
- Guide rail: 50x32mm
- Segment length: 3000mm (standard), 2000mm, 1000mm - gradations up to 6000mm
- Weight: 3,1kg/m
- Minimum bending radius of 600mm possible for segments
FH bends
It is possible to adjust the riser path to the substructure.
The minimum bending radius is indicated in the boxes above.
All technically feasible bending types can be found in the data sheet.
These components you need for your fall protection system
- Guide rail or ladder with integrated guide rail
- Fastening element
- Profile connector
- Climbing lock bottom 12 kN
- Climbing lock top 12 kN
- Identification plate
- Fall arrester
